Free shipping on purchases over 499,-

Fast delivery - within 1-2 working days.

Call customer service on 40 99 88 88

Anti-slip tape: Your complete guide to a safer environment

Non-slip tape: your complete guide to a safer environment

At Thamus.dk, we understand the importance of safety. Slippery surfaces are one of the most common causes of fall accidents in both private homes and professional environments. That is why we specialize in providing effective non-slip solutions, and our selection of non-slip tape is no exception. We offer a wide range of products designed to prevent falls and improve safety everywhere there is a risk of slipping. With our non-slip tape, you can transform dangerous areas into safe zones, so you and your employees can move around safely.

We are dedicated to creating safer environments by providing durable and easy-to-install anti-slip solutions. Our goal is to replace a culture based on warning signs with proactive safety measures that make slippery areas non-slip. Whether it is for the wooden stairs at home, a boat deck, or a busy industrial hall, we have the right non-slip tape to suit your specific needs.

Why is non-slip tape crucial for safety?

Non-slip tape is a simple but highly effective method for preventing fall accidents. It creates friction on slippery surfaces, which significantly reduces the risk of slipping, even in wet or greasy conditions. Imagine a rainy day where outdoor stairs become life-threatening, or a workshop where spilled liquids make the floor unsafe. In these scenarios, non-slip tape is not just an advantage, but a necessity. By investing in quality non-slip tape, you are investing in the safety and well-being of everyone who uses the area.

Our solutions are used in everything from private homes to large institutions, ports, and maritime areas. We have a wide range of products to improve safety and organization in both private and commercial environments, including our various types of non-slip tape.

Choose the right non-slip tape for your needs

The choice of the right non-slip tape depends on the application area, the expected wear, and the specific environmental conditions. We have carefully selected a range that covers most needs, from fine-grit tape for lightly trafficked areas to extra coarse tape that can withstand even the most demanding industrial environments.

Non-slip tape for indoor use

Indoor surfaces such as stairs, walkways, and kitchen floors can often become slippery. Here, our non-slip tape is designed to be discreet and effective. For example, we have a cleaning-friendly non-slip tape that is ideal for kitchens and wet rooms where frequent cleaning is necessary.

Non-slip tape for outdoor use

Outdoor surfaces are exposed to the elements, which places higher demands on the durability and resistance of the materials. Our outdoor non-slip tape is designed to withstand extreme temperatures, UV radiation, and moisture, making it ideal for terraces, stairs, bridges, and boat decks.

  • Extra heavy-duty/coarse non-slip tape: Ideal for high-traffic areas exposed to the elements, such as industrial floors, ramps, and outdoor stairs.

  • Flexible non-slip tape: For uneven or textured surfaces that require a tape that can adapt to the substrate.

Specialized non-slip tape

Some environments require more than just general non-slip protection. We offer specialized non-slip tape that meets unique safety and marking needs.

  • Warning non-slip tape: Designed with bright colors, often yellow and black stripes, to draw attention to dangerous areas such as steps, edges, or obstacles.

  • Non-slip tape in signal colors: For clear marking of walkways, escape routes, or danger zones.

  • Floor marking tape and symbols: In addition to non-slip protection, marking is crucial for organization and safety. Our floor marking tape is available in 9 colors and 2 widths (50mm and 75mm) and can help create clear and safe environments.

Our selection of non-slip tape is extensive, and we are sure you can find the perfect solution for your safety needs. Remember that we also offer accessories such as rubber rollers for optimal application.

Applications for non-slip tape

Non-slip tape is a versatile product with a wide range of applications. From private households to large industrial companies, our tape can significantly improve safety. Here are some examples of where our non-slip tape is often used:

Home and private properties

At home, non-slip tape is ideal for:

  • Stair treads: Both indoor and outdoor wooden or stone stair edges that can become slippery from wear or moisture.

  • Bathrooms and kitchens: Areas where water spills can create slippery surfaces.

  • Terraces and balconies: Especially in wet weather, surfaces can become dangerous.

  • Ramps: For wheelchairs or strollers, where a secure grip is essential.

Business and industry

In business environments, fall accidents are a common cause of injuries. Non-slip tape can be used on:

  • Factory floors and warehouse buildings: Where oil, water, or dust can make the floor slippery.

  • Walkways and workstations: To mark safe walkways and prevent falls.

  • Entrances and exits: Especially at doors that open to the elements.

  • Machines and equipment: On tread surfaces and handles for a secure grip.

Public spaces and institutions

Public places with many visitors have a great responsibility for safety. Non-slip tape is highly suitable for:

  • Schools and nurseries: On stairs and in areas where children move around.

  • Hospitals and nursing homes: To reduce the risk of falls among patients and residents.

  • Shops and shopping centers: At entrances, escalators, and on slippery floor types.

  • Sports facilities: Changing rooms, around pools, and on access routes.

Marine and maritime environments

On boats, ships, and in port areas, non-slip protection is crucial due to constant exposure to water, salt, and movement.

  • Boat decks and gangways: To ensure the safety of crew and passengers.

  • Bridges and quays: Especially in wet or icy weather.

  • Ladders and access ramps: For safe boarding and disembarking.

Regardless of the application, our non-slip tape is designed to provide maximum safety and durability. We offer solutions that effectively address the specific challenges presented by different environments.

Installation and maintenance of non-slip tape

Correct installation is crucial for your non-slip tape to last a long time and provide optimal protection. We always recommend following our simple steps to ensure the best adhesion and lifespan.

Installation guide

  1. Clean the surface thoroughly: Make sure the area is clean, dry, and free from dust, grease, oil, and loose particles. If necessary, use a degreasing cleaner and let the surface dry completely.

  2. Measure and cut the tape: Cut the non-slip tape to the desired length. We recommend rounding the corners to prevent the tape from peeling at the edges over time.

  3. Apply adhesive (if necessary): For certain demanding surfaces or outdoor use, it can be beneficial to use an adhesive primer or edge sealant to improve adhesion and protect the edges.

  4. Remove the protective film: Slowly pull the protective film off the back of the tape while pressing the tape firmly onto the surface. Start at one end and work your way forward to avoid air bubbles.

  5. Press the tape firmly: Use a rubber roller or similar tool to press the tape firmly onto the surface. This ensures maximum contact between the adhesive side of the tape and the substrate.

  6. Let it cure: Let the tape cure for at least 24 hours before exposing it to heavy traffic or moisture to achieve the strongest adhesion.

Maintenance of non-slip tape

Our non-slip tape is designed to be durable and requires minimal maintenance. However, regular cleaning can extend the tape's lifespan and preserve the non-slip effect. Use a stiff brush and mild soapy water to remove dirt and grime, and then rinse thoroughly. Avoid harsh chemicals that can break down the adhesive.

Thamus.dk: Your partner for non-slip safety

At Thamus.dk, we are proud to offer an extensive selection of anti-slip solutions, including our wide range of non-slip tape. We strive to be your preferred supplier of products that improve safety and the working environment. Our mission is to help you prevent fall accidents in all environments – at home, in business, in institutions, ports, and maritime areas.

We offer:

  • High quality and durable products.

  • Professional guidance and customer service on phone 40 99 88 88.

  • Fast delivery (within 1-2 business days).

  • Free shipping on purchases over 499,-.

  • A wide selection of non-slip products, including GRP strips, aluminum profiles, and mats.

See our full catalog for a complete overview of our products, or contact us today for personal advice. Let's create a safer environment together!

Type of non-slip tape

Application area

Properties

Recommended for

Universal

Indoor

Standard friction

Stairs, ramps

Cleaning-friendly

Wet rooms, kitchens

Easy to clean

Bathrooms

Extra coarse

Outdoor, industrial

High wear resistance

Factory floors

Flexible

Uneven surfaces

Flexible fit

Textured metal

Warning

Danger zones

High visibility

Steps, edges

Signal colors

Marking

Clear marking

Walkways

Frequently asked questions about non-slip tape

What is non-slip tape, and how does it work?

Non-slip tape is a material coated with an abrasive layer and an adhesive backing. It is applied to surfaces to create friction and prevent fall accidents. The rough surface provides a better grip, even in wet or slippery conditions, which significantly reduces the risk of slipping.

Where can I use non-slip tape?

Non-slip tape can be used on almost all slippery surfaces, both indoors and outdoors. Popular application areas include stair treads, ramps, walkways, boat decks, industrial floors, bathrooms, and around machines. It is a versatile solution that improves safety in many different environments.

How do I choose the right type of non-slip tape?

The choice depends on the application area. For indoor use with light traffic, a universal or cleaning-friendly tape is often sufficient. For outdoor use or areas with high traffic and harsh conditions, an extra heavy-duty or coarse tape is recommended. Also consider colors and special features such as warning or flexible tape for specific needs.

Is non-slip tape easy to install?

Yes, our non-slip tape is designed for easy installation. It typically only requires cleaning the surface, measuring and cutting the tape, and then securing it with a rubber roller. For optimal adhesion and durability, we recommend following our installation guide carefully, especially to ensure that the surface is clean and dry.

How long does non-slip tape last?

The durability of non-slip tape depends on the quality of the tape, correct installation, and how much it is exposed to wear and weather. Our products are made of durable materials that ensure a long lifespan, even in demanding environments. Regular maintenance and cleaning can also extend the tape's lifespan.

Can I buy non-slip tape in different colors?

Yes, we offer non-slip tape in several colors, including standard black, gray, yellow, and even signal colors such as yellow/black stripes for warning purposes. This gives you the option to choose a tape that either blends discreetly into the surroundings or is used for clear marking of dangerous areas.

What accessories do you recommend for installing non-slip tape?

For an optimal installation, we recommend using a rubber roller to press the tape firmly onto the surface, which eliminates air bubbles and ensures maximum adhesion. For certain applications, an edge sealant or adhesive primer may also be a good investment to improve durability.